Bally ProSlot 6000, Настройка и эксплуатация

Страница: 45 / 444

©2004 Bally Gaming and Systems
2-45
ProSlot
®
6000
| - Revised, || - New
Code Description Definition
20 Coin In Jam
The optics on the coin optic decoder
board have been blocked for too long.
21 Inappropriate Coin In
A coin has been accepted by the ma-
chine after the maximum number of
extra coins wagered have been regis-
tered. Extra coins up to the maximum
(currently 15) are paid from the hopper
upon completion of the game.
22 Invalid Coin
A coin has passed the coin optics dur-
ing a reel spin.
23 Coin Not Sensed
Coin was not sensed by the drop optic
(DS2-8=OFF Diverter Optic Installed)
24 Coin Reverse
A coin was sensed traveling from bot-
tom to top of the optic block.
50-26
1
Bill Paused
A bill was detained from entering the
bill acceptor stacker within the normal
time.
50-27
1
Bill Jam
A bill was prevented from entering the
stacker.
50-29
1
Bill Acceptor Com-
munication Error
Communication between the bill accep-
tor and the machine has failed.
30 Hopper Overpay
More coins than expected have been
sensed by the hopper's coin-out optic
during a payout.
31
Hopper Coin-Out
Jam
The hopper's coin-out optic has been
blocked too long (see Troubleshooting,
Hopper LED Error Codes).
32 Hopper Empty
The hopper circuitry has run in forward
direction for longer than 15 seconds with
no coins sensed by the coin-out optic.
33 Reset During Payout A system reset has occurred while the
hopper was running.
5
x
-36
1
Printer Failure General Printer Failure
5
x
-37
1
Printer Jammed The printer is jammed at the platen.
5
x
-38
1
Printer Empty The printer is out of paper.
5
x
-39
1
Printer Low
3
The paper sensor has detected a low
paper condition.
40
Reel Initialization
Error
The reels were unable to complete ini-
tialization after a system reset.
41
Reel #1 Improper
Spin
The reel did not spin to the expected
position.
42
Reel #2 Improper
Spin
The reel did not spin to the expected
position.
43
Reel #3 Improper
Spin
The reel did not spin to the expected
position.
44
Reel #4 Improper
Spin
The reel did not spin to the expected
position.
45
Reel #5 Improper
Spin
The reel did not spin to the expected
position.
50 Slot Door Open
The main door switch senses the door
is open.
51 Belly Door Open
The belly door switch senses the door
is open.
52
Bill Acceptor Stacker
Access
The stacker access switch senses the
door is open.
53
Lower Door Open
(Slant)
The lower door switch senses the door
is open.
54 Drop Door Open
The drop door switch senses the door
is open.
55
Bill Acceptor Stacker
Removed
Signal received from the bill acceptor
that there is no stacker.
||
56
4
Logic Door Access
The MPU board is removed or not
seated correctly.
||
57
4
System (sView/Tahoe)
Door Access
The sView door is open.
||
58
4
Latched Door Detector
Board
The battery is low for the latched (Main,
Logic, System, and Cashbox doors)
input circuit.
60
Reset During Bill
Change
A system reset has occurred during a
bill transaction.
65
Mechanical Meter
Disconnect
The electromechanical meters are dis-
connected from the machine (Market
Codes 3, 4, 12, 28, and 29).
Malfunction and Game Codes
Code Description Definition
70
Door Open During
Reel Spin
Any of the door switches have sensed a
door open during a reel spin.
71 Reel #1 Movement The reel moved at an inappropriate time.
72 Reel #2 Movement The reel moved at an inappropriate time.
73 Reel #3 Movement The reel moved at an inappropriate time.
74 Reel #4 Movement The reel moved at an inappropriate time.
75 Reel #5 Movement The reel moved at an inappropriate time.
77
Secondary Device
Communication Fault
During Game/Topbox
Wheel Feature Tilt
Topbox tilt condition has occurred in
the Monte Carlo and Lucky Wheel
machines.
80
2
ROM Checksum
Error
The checksum of the Main program
(U12, U15, U3, U4), or the Personal-
ity (U20, U18) does not match the
expected checksum.
81
2
Battery Low SafeRAM™ battery is below 2.2 VDC.
82
Door Open with
Power OFF
The machine door was opened while
the main power was OFF (requires
JW11 in).
83
2
SafeRAM™ Error
SafeRAM™ failed to retain information
during self-test.
83F-0 Invalid SafeRAM™
EPROM
Wrong EPROM's used for SafeRAM™
Clear.
83F-1 Invalid Main EPROM Wrong Main EPROM's detected after
SafeRAM™ Clear.
83F-2 Invalid Personality
EPROM
Incompatible Personality EPROM's de-
tected after SafeRAM™ Clear.
83F-3 Invalid Coin Denomi-
nation
Coin denomination not supported in
Market Code.
84
2
RAM Error
Volatile RAM failed to retain information
during a self-test.
85
MPU Removed with
Power OFF
The MPU board assembly was dis-
connected from the backplane while
power was OFF (requires JW15 and
JW21 in).
88 Catastrophic Failure
The MPU board has failed for an un-
known reason (if SafeRAM™ Clear
does not resolve error code, replace
MPU board).
89 Cashout to Host Error
Cashout to host fails with AFT enabled
and cashout to Host set to Hard. Open
and close door to clear error code.
90 Display Error
The controller for the LED message
center or vacuum fluorescent display
has failed.
91 Communication Error
The machine is expecting and not re-
ceiving serial communication from the
progressive controller (refer to Trouble-
shooting, Communication Errors). The
machine will not tilt, and requires a
SafeRAM™ clear to resume operation
if the door is opened before releasing
progressive win lockup.
91-0 No Communication
No serial traffic found within the last 500
milliseconds.
91-1
Serial Checksum
Error
Data received by the machine is not the
same as sent by the controller.
91-2 Optioning Error
Conflicting machine options (for ex-
ample 02=04 and 78Lo=0).
| 91-4
Mystery Progressive
Hit during Game Over
Award data is in the serial stream at
an unexpected time. A Handpay is
required for the Mystery Award. Turning
the Keyswitch displays the Handpay
information. The tilt will clear in five
seconds and the amount awarded is
displayed in
WIN PAID
.
91-5 Jackpot Missing
MAPS jackpot information missing from
APC communication.
91-7 Game Error Lockout Host status poll timeout detected by
game.
91-8
Host Defined Lockout
in Configuration
Game disabled by holiday/non-holiday
enable/disable configuration.
91-9
Game in Host
Configuration
Host is in the process of configuring
the game.