19
19
english
Output Halfbyte of the Data Contents of an Address:
< OK >
< Shortform >
< ESC = Exit >
< Print . . . . >
< F1 = Help >
( ) Output not used.
( • ) Output halfbyte of data contents of an address.
( ) Compare contents of multiple addresses with a fixed value.
( ) Compare contents of an address with various fixed values.
( ) Compare contents of multiple addresses with a content of one address.
( ) Output data bits of variable addresses.
( ) Program input as data bit to data carrier.
( ) Read and transmit data carrier data without command.
Either the upper or lower 4 bits (Nibble) of the 8 bits data contents of an address is output
(Bit 0 on Output 1, Bit 1 on Output 2, etc.). The address is given in decimal.
Data carrier adress [ 9999 ]
( ) Output High Nibble ?
( • ) Output Low Nibble ?
< Data to BIS >
< Store >
< ESC = Exit >
< F1 = Help >
OUTPUT HALFBYTE OF DATA CONTENTS OF AN ADDRESS
IN/OUTPUT CONFIGURATION
Menu Allocate
Input/Outputs
(BIS C-600 only)
(continued)
BIS C-600
Configuration
C-6_0-007-00_836905_E_0704.p65
20
english
20
Compare Contents of multiple Addresses with a fixed Value:
The data contents of up to 4 addresses are compared with a fixed decimal value. To each
address can be assigned which of the Outputs 1 to 4 is set or cancelled by a positive result
of the comparison an whether in case of a negative result of the comparison the output shall
not be changed or shall be set in contrary to the definition with the positive result (inverted
response).
All addresses found within the read command will be processed.
If the parameter "Process outputs with CT-Present" is included in the initialization, then this
function also will be carried out on recognition of a new data carrier (one or more of the ad-
dresses given should be on the first page of the data carrier).
[ 9999 ]
[ 1 ]
( • ) Set
( ) No change
( ) Clear
( • ) Invert
[ 9999 ]
[ 2 ]
( • ) Set
( ) No change
( ) Clear
( • ) Invert
[ 9999 ]
[ 3 ]
( • ) Set
( ) No change
( ) Clear
( • ) Invert
[ 9999 ]
[ 4 ]
( • ) Set
( ) No change
( ) Clear
( • ) Invert
Negative compar.
Output
Positive compar.
< Data to BIS >
< Store >
< ESC = Exit >
< F1 = Help >
Fixed value:
[ 000 ]
Address
Compare Contents of multiple addresses with fixed value
Menu Allocate
Input/Outputs
(BIS C-600 only)
(continued)
BIS C-600
Configuration
