27
27
english
Read and transmit tag data without command:
The given number of bytes (Number of bytes from Start address) will be read from a newly
recognized data carrier.
After they are read, the data will be automatically sent to the interface.
Additionally, as termination, a BBC and/or 1 or 2 freely definable terminating characters can
be sent.
startaddress:
[ 0000 ] decimal
number of byte:
[ 0000 ] decimal
data
< Data to BIS >
< Store >
< ESC = Exit >
< F1 = Help >
data transmission after CT-Present
BCC
[ ] yes
1.
terminator:
[ ] yes
value:
[ 000 ] dec.
2.
terminator:
[ ] yes
value:
[ 000 ] dec.
terminator
Menu Allocate
Input/Outputs
(continued)
BIS C-6_0
Configuration
C-6_0-007-00_836905_E_0704.p65
28
english
28
Customer Configuration
Initialization
Please note the settings in the label fields on the inside of the processor cover so that in case
of repair of the processor the settings can be reset in the factory. Note the settings also in the
following fields so that you can set, e.g. other units, to an identical configuration.
On the following page you will find an example which shows how you can print-out after
initializing. Enter the settings in the appropriate fields so that you have them handy and can
reproduce the settings at any time. You can then enter the data in short form into the mask.
(see also page 29).
[ 19200 ] [ 8 ] [ 1 ] [ N ]
[ 4 ] [ 2] [ 2 ] [ 2 ] [ 1 ]
[ 01101100 ]
< B = <– >
< ESC = Exit >
< F1 = Help >
SHORTFORM OF INITIALIZATION BIS C-600
Baudrate
Data
bit
Stop
bit
Pa-
ity
Interface
Block size
Protocol
type
2
2
Input
Parameters
