Baldor MDH2A07TR-RB23 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 172

background image

www.baldormotion.com

Operation 5-9

MN1901

5.3 Further configuration

Mint WorkBench provides a number of tools, each of which has an icon on the left of the
screen. Click once on an icon to select the tool. Three of the main tools used for tuning and
configuring the MintDrive

II

are briefly described here.

Every tool is explained fully in the help file. Press F1 to display the help file, then navigate to
the Mint WorkBench book. Inside this is the Toolbox book.

5.3.1 Fine-tuning tool

The Commissioning Wizard calculates many parameters that allow the MintDrive

II

to provide

basic control of the motor. These parameters may need to be fine-tuned to provide the exact
response that you require. The Fine-tuning screen allows you to do this.

1. Click the Fine-tuning icon in the Toolbox on the left of the screen.

The Fine-tuning window is displayed at the right of the screen. This
already shows some of the parameters that have been calculated
by the Commissioning Wizard.

The main area of the Mint WorkBench window displays the capture
window. When further tuning tests are performed, this will display
a graph representing the response.

2. The Fine-tuning window has three tabs at the

bottom - Position, Speed and Current. Click on
a tab to select it.

Click the tab for the type of tests you wish to
perform.

Note:

Some tabs may not be available depending on the configuration mode you
selected in the Commissioning Wizard.

5.3.1.1 Fine-tuning - Position tab

The position tab allows you to set position loop gains and perform test moves.
The Commissioning Wizard may have already set some of these values, depending on the
type of system selected on the mode screen.

Enter new values in the required boxes and then click

Apply

to download the values to the

MintDrive

II

. To perform tests, go to the Test Parameters area at the bottom of the tab. Enter

test values and then click

Go

to perform the test move. If you need help, just press F1 to

display the help file.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
84
85
86
87
88
...
»

Содержание MDH2A07TR-RB23













































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MDH2A07TR-RB23

VLT Integrated Servo Drive ISD 510 System

Бренд: Danfoss Страницы: 226

GA700 GA700 Series

Бренд: YASKAWA Страницы: 32

Бренд: YASKAWA Страницы: 50

Бренд: Kone Страницы: 42

Бренд: Frecon Страницы: 47

Бренд: Geckodrive Страницы: 12

Бренд: Hafele Страницы: 84

Бренд: BONFIGLIOLI Страницы: 40

Бренд: Vescent Photonics Страницы: 18

Бренд: BONMET Страницы: 85

Бренд: Leadshine Technology Страницы: 17

Бренд: Leadshine Technology Страницы: 17

Бренд: Leadshine Страницы: 70

Бренд: STG-BEIKIRCH Страницы: 25

Compax3H C3H050V4

Бренд: Parker Страницы: 44

Бренд: KB Electronics Страницы: 18

Penta Power KBRG-212D

Бренд: KB Electronics Страницы: 32

Бренд: Jenaer Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды