Baldan SPDE CXP, Инструкция по эксплуатации

Страница: 59 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 59
Instruction Manual
ADJUSTMENTS OF THE LINES
To adjust the depth of the ridged or plain cutting disc (1), proceed as follows:
To move the ridged or plain cutting disc (1) in the horizontal position, proceed as
follows:
ADJUSTMENT OF THE SLIT OR PLAIN CUTTING DISC
1- Remove the lock (1) and the pin
(2), adjust the height of the bra-
cket (3) and fix the bracket again.
ADJUSTMENT OF ANGLE AND DEPTH LIMITER
WHEEL DEPTH
ANGLE POSITION
TOTALLY CLOSED:
Minus the earth on the seed.
ANGLE POSITION
TOTALLY CLOSED:
More earth on the seeds.
WHEEL ANGLE POSITIONS:
The angle of the depth limiting whe-
els (1) is to pressure the groove, cau-
sing the soil to be immediately repla-
ced over the seeds, avoiding excessive
compaction, facilitating the germina-
tion and development of the plant.
The wheels are fixed to a shaft with the
ends angled (2), specially designed to
allow compacting, depth control and
burying of the seeds. To obtain these
settings on the wheel, loosen the nut
(3) and turn the axle (2), observing the
wheel movements.
1
2
3
2- Loosen the bolts (4), lock washers
(5) and springs (6), move the disc
to the desired position and lock it
again.
When finalizing the adjustment, repeat this procedure on all cutting discs,
avoiding variation between the lines.
ATTENTION
2
3
1
4
3
6
5