Baldan SPDE CXP, Инструкция по эксплуатации

Страница: 62 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 62
Instruction Manual
RECOMMENDATIONS FOR OPERATION
After the first day of work with the seeder, retighten all screws and nuts. Check the condition of the pins and locks.
Do not maneuver or reverse with the lines down on the ground.
Observe the lubrication intervals.
When filling the tanks, check for objects in them, such as nuts, bolts, etc. Always use seeds free from impurities.
Always observe the operation of the seeds distribution mechanisms and also the adjustments established at the beginning of planting.
Always keep the seeder leveled, the tractor drawbar must remain fixed and the working speed should remain constant.
Always check the depth of seeds and the pressure of the compactor wheels.
Note the position of the fertilizer in relation to the seed in the soil.
When performing any checks or maintenance on the seeder, lower it to the ground and switch off the tractor engine.
Do not make sharp turns with the seeder during work, especially in direct planting. The components of the lines may be damaged.
Do not partially activate the hydraulic cylinders. The activation for raising or lowering of the seeder should always be complete.
The sower has several settings but only local conditions can determine the best setting.
Only fill the seeder in the workplace.
Do not transport or work with an overload on the seeder.
The right and left side readings are made by observing the sower from behind.
The
SPDE CXP seeder operates more efficiently in the range of 5 to 7 km / h.
If in doubt, never operate or handle the seeder, contact Post Sales.
Telephone: 0800-152577 or Email: posvenda@baldan.com.br
05 -
06 -
07 -
08 -
09 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
01 -
02 -
03 -
04 -
OPERATION