Baldan SPDE CXP, Инструкция по эксплуатации

Страница: 78 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 78
Instruction Manual
OPTIONALS
The
SPDE CXP
seeder has options that can be purchased according to the need for work. Within the options available are:
SPDE CXP can be purchased optionally with the ETD (Electronic Dosing Table) system. The
ETD is an electronic device that can be connected to planters, seeders and fertilizers to assist
the operator in setting the best gear ratio so that the correct dosage of seeds and fertilizers
occurs, according to the needs of each area / plot, based on the adjustments previously done
in the field and calibrations before planting. It allows to perform other additional functions
such as the registration of planted hectares, hours actually worked and planting speeds above
specified, and this important information is recorded and shown on the ETD electronic device
display.
ETD SYSTEM (ELECTRONIC DOSING TABLE)
ETD (ELECTRONIC DOSING TABLE)
To use the ETD (Electronic Dosing Table), refer to the instruction
manual on the following pages.
ATTENTION