Baldan SPDE CXP, Инструкция по эксплуатации

Страница: 25 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 25
Instruction Manual
1- Approach the tractor slowly to the seeder in reverse gear, paying attention to the application of the brakes.
2- Then, level the coupling head (1) of the seeder in relation to the coupling of the tractor through the regulator (2). Then, approach the tractor slowly to the seeder in
reverse gear, paying attention to the application of the brakes.
3- Then engage the coupling head (1) to the tractor, securing it through the coupling pin (3) and lock (4).
4- Then, attach the rest of the hoses (5) to the tractor’s quick coupling.
COUPLER
COUPLING ON THE TRACTOR
Before attaching the seeder on the tractor, check that the tractor is equipped with a set of weights or ballasts on the front or the front wheels to avoid lifting the tractor. The
rear wheels will give the tractor greater stability and traction on the ground. To couple the seeder, proceed as follows:
ATENTION
Before connecting or disconnecting the hydraulic hoses, turn
off the engine and relieve the hydraulic system pressure by
fully operating the control levers. When relieving the system
pressure, make sure that no one is near the moving area of
the equipment.
When engaging the seeder find a safe and easily accessible
place, always use a low gear with low acceleration.
IMPORTANT
1
3
4
5
2