Baldan SPDE CXP, Инструкция по эксплуатации

Страница: 56 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 56
Instruction Manual
The depth adjustment of the seeder is done by the pressure of the springs and the piston
limiters.
The pressure of the springs depends on the conditions of the soil and the sowing system
(conventional or direct) that allows different adjustments, observing the combinations of
the springs in such a way:
1- Loosen the bushing (4) through the screw (5) and secure it to the rod
in order to release the lowering of the line. Secure the bushing about
5 cm above the rod support (6).
SPRING PRESSURE ADJUSTMENT
The excess pressure in the springs causes the ma-
chine to be raised by the reaction of the soil .being
penetrated.
IMPORTANT
The depth capacity of the seeder is due to the appropriate and com-
bined pressure of the active elements of the seeder. During the plan-
ting on land where there are variations in soil moisture or other fac-
tors, check the depth of work several times.
ATTENTION
System of
TRIPLE SPRIN
System de
DOUBLE SPRINGS
System of
SIMPLE SPRINGS
Internal Spring (1),
Intermediate (2)
and external (3).
Spring (1),
and Intermediate (2).
Internal Spring (1).
For planting
directly in COMPACTED SOIL
For planting directly
SOIL W/ MEDIUM
COMPACTION
For planting directly and
conventional for
SOIL W/ LOW COMPACTION
7
8
9
5
6
4
1
1
2
1
2
3
ADJUSTMENTS OF THE LINES
2- Loosen the bushing (7)
through the screw (8)
and secure the above in
order to give pressure to
the springs (9) for better
penetration of the line.