Baldan MOVERE, Инструкция по эксплуатации

Страница: 56 / 86

To regulate the working depth of MOVERE , proceed as follows:
ƒ
Adjustments
• Working depth adjustment
1 - Activate the rods of the hydraulic cylinders (1) of the wheel until necessary.
2 - Then, set the limiting rings (2) on the rods of the hydraulic cylinders (1) to fill the
entire space between the rod coupling and the hydraulic cylinder (1).
3 - After completing the work with MOVERE , remove the limiting rings (2) from the
hydraulic cylinders (1) of the wheel.
Always place the same number of limiting rings (2) on the hydraulic
cylinders (1) of the wheel.
WARNING
IMPORTANT
1
2
2
After adjustment, MOVERE will always operate in the same depth,
both in hard and loose terrain, because the limiting rings (2) are
limiting the stroke of the hydraulic cylinder (1) of the wheel, that
is, preventing oscillation of the wheels.
NOTE
The limiting rings (2) that come with MOVERE have different sizes which
combined offer various depth settings.
Instruction Manual
MOVERE
56