Baldan MOVERE, Инструкция по эксплуатации

Страница: 39 / 86

3 9
• Mounting the hydraulic cylinders on the uprights
To mount the hydraulic cylinders to the uprights, proceed as follows:
ƒ
Assembly
1 - Attach the base of the hydraulic cylinder (1) to the point "A", attaching through pin (2),
washer (3), bolt (4) and the piston rod (1) at the point "B", through the pin (5), plain washers (6)
and cotter pins (7).
2 - Then, attach the base of the hydraulic cylinder (8) to the point "C", attaching to pin (9), plain
washers (10), cotter pin (11) and the rod of the hydraulic cylinder (8) at the point "D", through
the pin (12), flat washer (13) and cotter pin (14).
3 - Then, attach the base of the hydraulic cylinder (15) to the point "E", attaching through the
pin (16), plain washers (17), cotter pin (18) and the rod of the hydraulic cylinder (15) at the point
"F", through the pin (19), washer (20) and cotter pin (21).
Repeat the above procedure to mount the hydraulic cylinders in the center right,
middle right and right side posts.
NOTE
5
6
7
7
1
2
4
3
8
9
6
“A”
“C”
“E”
“D”
“F”
“B”
10
12
10
13
11
14
15
16
17
17
18
19
20
21
Instruction Manual
MOVERE