Baldan MOVERE, Инструкция по эксплуатации

Страница: 35 / 86

Instruction Manual
MOVERE 35
• Assembly of the coupling header - MOVERE 88 discs
To assemble the coupling header, proceed as follows:
ƒ
Assembly
3
4
5
1
18
16
17
10
9
14
15
6
8
7
20
19
2
18
17
11
12
13
01 - Attach the coupling header (1) to the upright (2), fixing through the pins (3), flat
washers (4) and nuts (5).
02 - Then, attach the rod (6) to the rod support (7), spring back (8), flat washer (9) and
nuts (10).
03 - Then, fix the rod base (6) to the upright (2) through the pin (11), flat washer (12)
and cotter pin (13) and fix the rod support (7) to the coupling header (1) through the
screws (14) and nuts (15).
04 - Then, fix the regulator (16) to the upright (2) using the flat washers (17) and nuts (18).
05 - Finish by fixing the hose support (19) on the coupling header (1) through the nut (20).