Baldan MOVERE, Инструкция по эксплуатации

Страница: 29 / 86

29
• Assembly of the disc sections on the frames of the left intermediate and
left side
ƒ
Assembly
WARNING
After fixing the frames (1) to the upright (2), secure the disc sections (3) to this, proceed as
follows:
1 - Lift the front or rear of the grid and place the disc section (3) in line and match the drilling
of the shoes (4) with those of the bearings and secure them with screws (5), plain washers (6),
nuts and locknuts (7).
2 - Then, lift the other part of the grill and repeat the operation by checking the concavity of
the disks from one section to the other that should be opposite.
3 - When completing the assembly, make sure that the shoes (4) face the discs' concavity.
4
1
4
3
5
7
6
3
2
1
When assembling the disc sections on the frames, note that the frame
shoes should face the discs' concavity.
Repeat the above procedure for mounting the disc sections on the right
side uprights.
NOTE
Instruction Manual
MOVERE