Baldan CRI, Инструкция по эксплуатации

Страница: 38 / 68


In order to adjust the working depth through tires, limiting rings (1) are placed on the
shafts of the hydraulic cylinders (2), providing many adjustments of working depth. To
adjust the working depth, proceed as follows:
01 - Remove limiting rings (1) from hydraulic hoses (2).
02 - Then, tighten the rods of the hydraulic cylinders (3) of the wheel until necessary.
03 - Then fit the limiting rings (1) on the rods of the hydraulic cylinders (3) to fill the
entire space between the rod coupling and the hydraulic cylinder plunger (3).
04 - After finishing work with the CRI , remove limiting rings (1), hydraulic cylinders (3)
from the wheel support and place it in the hydraulic hoses (2).
1
3
IMPORTANT
After adjustment, the CRI will always operate at the same
depth, both in hard and loose terrain, because the limiting
rings (1) are limiting the stroke of the hydraulic cylinder (3)
of the wheel, that is, preventing the wheels from oscillating
.
OBSERVATION
2
1
Limiting rings (1) accompanying the CRI have different sizes
which combined offer various depth settings.
Instruction Manual