Baldan CRI, Инструкция по эксплуатации

Страница: 53 / 68


04 - When connecting or disconnecting hydraulic hoses, do not let the terminals touch
the ground. Before connecting the hydraulic hoses, wipe the connections with a
clean, lint-free cloth.
Do not use tow!
05 - Replace all adhesives, especially those about warnings, that are damaged or missing.
Make everyone aware of the importance and risks of accidents when instructions
are not followed.
06 - After all maintenance care, store your CRI on a flat, covered, dry surface, away from
animals and children.
07 - We recommend washing the CRI with water only at the start of work.
Do not use chemicals or abrasives to rinse the CRI,
this may damage the paint and adhesives. ATTENTION
To prolong the life and appearance of the CRI for longer, follow the instructions
below:
01 - Wash and clean all harrow components during and at the end of the work season.
02 - Use neutral products to clean the harrow, following the safety and maintenance
instructions provided by the manufacturer.
03 - Always carry out maintenance during the periods indicated in this manual.
The practices and care below if adopted by the owner or operator make a difference
to the conservation of the CRI .
01 - Be careful when performing high-pressure washing; do not direct the water jet
directly into the connectors and electrical components. Isolate all electrical
components;
02 - Use only NEUTRAL detergent and water (pH equal to 7);
03 - Apply the product, following the manufacturer's instructions strictly, on the wet
surface and in the correct sequence, respecting the time of application and washing;
04 - Stains and dirt not removed with the products should be removed with the aid of a
sponge.
05 - Rinse the machine with clean water to remove any chemical residues.
Instruction Manual