Baldan CRI, Инструкция по эксплуатации

Страница: 32 / 68

IMPORTANT
9
1
3
2
5
8
4
6
7
Always use "thread seal" to engage "male"
quick couplings onto the hoses.

After assembling the stabilizer bar, attach the hydraulic hoses to this, proceed as
follows:
01 - Attach the hose support (1) to the coupling head (2) through the lock nuts (3).
02 - Then, attach the hydraulic hoses (4) to the hydraulic cylinder (5).
03 - Then secure the hydraulic hoses (4) on the upright (6) through the clamp (7), washer
(8) and bolt (9).
4
4
When assembling the hydraulic hoses, do
not let terminals touch the ground.
ATTENTION
Instruction Manual