Baker Hughes Masoneilan SVI II AP, Быстрый старт

Страница: 104 / 108

© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
104 | = BHGE
5. Send 20 mA to the test set-up.
6. Increase the potentiometer value until the loop current reaches 19.95 mA.
7. Read the voltage across the potentiometer, which should be > 9 VDC. This is the
available system voltage at the maximum output.
Table 17 lists some compliance voltage readings at positioner terminals at several currents.
Table 17: Expected Voltage Range at Positioner Terminals
Current Compliance Voltage
Requirement at
Positioner Terminals
Expected Voltage Measured at
Positioner Terminals
4 mA 11 V 10 to 11 V
8 mA 10.5 V 9.5 to 10.5 V
12 mA 10 V 9 to 10 V
16 mA 9.5 V 8.5 to 9.5 V
20 mA 9 V 8 to 9 V