Baker Hughes Druck DPI 880, Инструкция по эксплуатации

Страница: 7 / 168

Copyright 2005 Baker Hughes Company.
English–DPI880 Instruction Manual | 3
1.3 Prepare the Instrument
Before you use the instrument for the first time:
•
Make sure that there is no damage to the instrument,
and that there are no missing items.
• Remove the plastic film that protects the display. Use
the tag (

) in the top right-hand corner.
• Install the batteries (refer to Figure B1). Then re-attach
the cover.
1.4 Power On or Off
To set the power on or off, press

(Figure A1 - Item 1).
The instrument does a self test and then shows the
applicable data.
When the power is off, the last set of configuration options
stays in memory. Refer to “Maintenance”.
1.5 Set up the Basic Operation
Use the Set Up menu to set up the basic operation of the
instrument.
If there is additional data for a menu option, select Settings
(

) to see the values that are set up. If necessary, adjust
the values.
1.6 Select a Task (Measure and/or Supply)
When the instrument is set up (Table 1), use the task
selection menu to select the applicable task.
5.0V
…V = The input trigger level (Table 4) or the
output amplitude (Table 5).
22.
, …, = Output operation (Table 5).
23.
13.400
55mA
The measured values applicable to the task
selections in Item 25, area

and

+ the
measurement range and units.
24.
Sk1/2
A soft-key function. To select an available
function, press the soft-key below it. Example:
= Move left
= Move right
25. The task selection menu. One task selection is
permitted in each area (

and

).
= cursor position (flashes on/off)
= a button or task selection is set in area

or

.
Sets the Dual Function, area

selections to
off. This saves the battery power.
Refer to: Table
2 & Table 3.
Help: Shows a connection diagram for the task
selections you have set.
Set Up: Shows the Set Up menu to set up the
basic operation. Refer to Table 1.
OK: Accepts the selections on the menu.
Note: MENU/OK also does this.
Utilities: Leak Test. Use this function with a
UPM. Refer to Figure 13.
Snapshot: Optional item - To use this facility,
install the data logging upgrade kit. Refer to
the user manual - K0397: DPI800 series data
logging upgrade kit.
Item Description
1 2
Task selection
menu:
3
Menu:
Set Up
4 5


+



(Table 2) (Table 1) [

]/[ ]
Table 1: Menu Options - Set Up
Options Description
… Scale
To select the applicable international
temperature scale: IPTS 68 or ITS 90.
To add a 250Ω series resistor into the mA circuit.
You can then use this instrument together with a
HART® communicator to set up and calibrate
HART® devices.
To select and set up the backlight fa timer.
Additional data: Select Settings (

)
To select and set up the power off fa timer.
Additional data: Select Settings (

)
To show the battery level (%).
To set the display contrast (%).

Increases %,

decreases %
To set the time + date. The calibration facility
uses the date to give service and calibration
messages.
To set the language option.
To calibrate the instrument.
Additional data: Refer to “Calibration”.
To select and show the applicable status data.
(Software Build, Calibration Due date, Serial
Number, IDOS Information).
1 Task selection menu: 2 3 4 5


+



+

(Table 2 & Table 3) Task = mA output
MENU
OK
MENU
OK
9
MENU
OK
MENU
OK
1
2
MENU
OK
MENU
OK