Bajaj pulsar DTS-i, Руководство по обслуживанию станции

Страница: 241 / 253

HORN
Dos
3
Ensure that resonator is not
pressed by any portion of
cables or wiring harness as it
will result in distorted sound.
• Adjust horn by phillips screw
driver
- without removing silicon
sealant from the adjustment
screw.
- by rotating the screw in the
direction of arrow provided
in the screw.
Ensure that horn is firmly fitted
on frame
Ensure that horn is free from
dust and mud accumulation.
Ensure that battery is fully
charged.
Ensure that horn switch button
is operating freely.
Ensure that horn wires are
intact.
Don'ts
7
Do not hit by mallet /
s c r e w
d r i v e r o n h o r n
resonator.
Never remove resonator
cap as it could result in
water entry & subsequent
malfunctioning of horn
Do not apply pressurised
water jet directly on horn
resonator.
Do not remove silicon
sealant from adjustment
screw as it will result in
water entry in horn.
Never adjust nut on horn
cap side & bracket end
(back side) as it will result
in horn malfunctioning &
failure.
Pulsar 150/180 DTS-i
Service Station Manual
237
Dealer Development Center
Akurdi Pune
DOS AND DON’TS