Bajaj pulsar DTS-i, Руководство по обслуживанию станции

Страница: 73 / 253

Pulsar 150/180 DTS-i
Service Station Manual
69
Dealer Development Center
Akurdi Pune
IMPORTANCE OF PM SCHEDULE EXECUTION
Sealed Type Drive Chain Lubrication on Vehicle
1. Put vehicle on center stand. Normal dust should be wiped clean using a
lint free cloth.
2. Hold the Chain Lube Spray Can (OKS Spray) vertically upright & shake it
vigorously till the noise of steel ball inside the can is heard uniformly. Fix
the extension tube (red pipe provided with the can).
3. Hold the can at the back of the rear sprocket in line with chain rotation
and keep the nose of the extension tube at about 5~10 cms away from
the chain.
4. Rotate the wheel in reverse direction & spray the lube on the middle
portion of the chain so that lubricant will get spread on roller & bushes
and on both sides of the chain. Spray the lube on full length of chain by
rotating the wheel to a complete rotation.
5. Rotate the wheel 3 ~ 4 times so that the lubricant spreads & settles for
5~6 times.
Wipe out any excess lubricant if it has dripped down or sprayed on the
wheel / tyre.
Note :-
If drive chain is excessively dirty, then drive chain has to be removed &
cleaned using mixture of chain cleaning & lubricating spray, Diesel & SAE90
oil in 1:1 ratio.
6. Adjust chain slackness as per specification.