Bajaj pulsar DTS-i, Руководство по обслуживанию станции

Страница: 230 / 253

ELECTRICAL CHECKING
PROCEDURES
Pulsar 150/180 DTS-i
Service Station Manual
226
Dealer Development Center
Akurdi Pune
CDI Assembly
Identification :
• Case colour - Black for Pulsar 150
• Coupler - White 2 coupler with sealed
type.
• Case colour - Brown for Pulsar 180
• Coupler - Black 2 coupler with sealed
type.
• Make - Varroc
Measuring & Testing Equipment : CDI / HT
Coil Tester.
Measuring & Testing Equipment : CDI / HT Coil tester.
SOP for CDI/H.T. Coil Checking
• Hang the unit on leg guard of the vehicle.
• Remove Spark Plug cap & connect to suitable terminal S1/S2 on the unit.
• Connect 'Red' probe of the unit to HT coil primary terminal.
• Connect 'Black' probe to earth.
• Start the engine.
• Status of LED & Spark window indicates the result as below.
S.N. LED Status
Glows
Glows
Glows
Does not
Glow
Conclusion Spark Status
1.
2.
3.
4.
Continuous
Bluish Spark
No Spark
Intermittent
Spark
No Spark
Ignition system is OK
HT Coil / Spark plug / Plug cap
may be defective
HT Coil / Spark plug / Plug cap
may be defective
Check pick up coil & Exciter coil
if found OK then replace CDI