Baja™ Mobility BA400
33
EN
WHEEL REPLACEMENT
If your vehicle is equipped with pneumatic tires and
you have a
fl
at tire, you can have the tire replaced.
Contact your authorized dealer for information
regarding replacement wheels for your vehicle.
WARNING! Wheels on your vehicle
should only be serviced/replaced
by a quali
fi
ed technician.
WARNING! Completely de
fl
ate
pneumatic tires before
dismantling the rim or attempting
repair.
WARNING! Be sure that the key is
removed from the key switch and
the vehicle is not in freewheel
mode before performing this
procedure.
WARNING! When changing a
pneumatic tire, remove only
the lug nuts, then remove the
wheel. If any further disassembly
is required, de
fl
ate the tire
COMPLETELY or it may explode.
1. LUG
NUTS
2. WASHERS
3. WHEEL
4. HUB
Figure 26. Wheel Removal
IDENTIFICATION KEY
3
1
2
4
V I I I . C A R E A N D M A I N T E N A N C E
Follow these easy steps for a quick and safe repair for pneumatic tires:
1. Remove the key from the key switch and ensure your vehicle is not in freewheel mode.
2. Elevate the side of the vehicle of which you are removing the tire. Place wooden blocks under the frame to elevate
the vehicle.
3. Remove the lug nuts and washers from the hub.
See
fi
gure 26.
4. Remove the wheel from the hub.
5. Reassemble the rim halves.
6. Slide the wheel back onto the hub.
7. Reinstall the washers and then the lug nuts and tighten.
WARNING! Ensure that the axle key is properly installed into the axle slot when mounting the
wheel. If not installed securely, the braking system is disengaged which may cause personal
injury and/or product damage may result.
8. In
fl
ate pneumatic tires to the psi/bar/kPa air pressure rating indicated on each tire.
9. Remove the block from beneath the vehicle.
DAILY CHECKS
With the power turned o
ff
, check the throttle. Make sure it is not bent or damaged and that it returns to the
neutral position when you release it. Do not try to repair it. See your authorized dealer if there is a problem.
Visually inspect the tiller cable. Make sure that it is not frayed, cut, or has any wires exposed. See your
authorized dealer if there is a problem.
Check for
fl
at spots on solid tires. Flat spots could adversely a
ff
ect stability.
Inspect the armrests for loose hardware, stress points, or damage. See your authorized dealer if there is a
problem.
Check the brakes. This test should be carried out on a level surface with at least 3 feet (1 meter) of clearance
around your vehicle.
Содержание BA400
