USER MANUAL AND ASSEMBLY INSTRUCTIONS
Congratulations, once again, on buying an
E
RIDER Model 15
!!!!
USER MANUAL
We are sure you will be excited by the delivery of your brand new bike
and you will be eager to start using your
E
RIDER
as soon as possible.
However you will need to be a little patient as there are some
important things to be done before you can ride it.
Firstly, the bike cannot be fully assembled for safe delivery so please
refer to our
Assembly Instructions
below and follow them closely to
put your bike together safely.
Secondly, during the time your
E
RIDER
has been in transport and
storage, its battery will have lost some charge.
Before using the bike you
must
put the battery on charge. Plug the
charger to a power socket and you should get a green light on the
transformer. Attach the charger to the battery and this should turn
red. Wait until it turns green again and it is now fully charged.
The other important thing you must do is inflate your tyres to the
correct pressure of 40psi. This can be done with any pump or
compressor fitted with a Schrader fitment (same as for a car tyre).
