Baja BA400, Руководство пользователя

Страница: 35 / 112

Baja™ Mobility BA400
35
EN
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly of the vehicle must
be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fi t. Replacement nylon insert lock nuts are available at local hardware stores or through
your authorized dealer.
STORING YOUR VEHICLE
If you plan on not using your vehicle for an extended period of time, it is best to:
 Fully charge its batteries prior to storage.
 Disconnect the batteries from the vehicle.
 Store your vehicle in a warm, dry environment.
 Avoid storing your vehicle where it will be exposed to temperature extremes.
 Although your vehicle can withstand short-term storage temperatures between -40°F (-40°C) to 149°F (65°C),
it is recommended that long-term storage temperatures be between -13°F (-25°C) and 122°F (50°C). Ideal
storage conditions are 68°F (20°C) to 70°F (21°C) wherever possible, but we realize that is not always feasible
due to di
ff erent climates and environments.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. Charging a frozen battery can result in damage to the battery.
Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures or stored
without a full charge may be permanently damaged, causing unreliable performance and limited service life. It is
recommended that you charge the vehicle batteries periodically throughout periods of prolonged storage to ensure
proper performance.
You may wish to place several boards under the frame of your vehicle to raise it o ff of the ground during periods
of prolonged storage. This takes the weight o ff the tires and reduces the possibility of fl at spots developing on the
areas of the tires contacting the ground.
DISPOSAL OF YOUR VEHICLE
Your vehicle must be disposed of according to applicable local and national statutory regulations. Contact your
local waste disposal agency or authorized dealer for information on proper disposal of packaging, metal frame
components, plastic components, electronics, batteries, neoprene, silicone and polyurethane materials.
WARNING! Plastic bags are a suffocation hazard. Dispose of plastic bags properly and do not
allow children to play with them.
FUSE REPLACEMENT
In the event a fuse should cease to work:
1. Remove the fuse by pulling it out of its slot.
2. Examine the fuse to be sure it is blown. See
fi gure 27.
3. Insert a new fuse of the same rating.
WARNING! The replacement fuse
must exactly match the rating of
the fuse being replaced. Failure to
use properly rated fuses may cause
damage to the electrical system.
Figure 27. Fuse Replacement
Working Fuse Blown Fuse (Replace)
V I I I . C A R E A N D M A I N T E N A N C E