geysair
tm
addendum to the owner’s manual |
THERMOMASSEUR
®
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © september 2012 Bainultra inc. all rights reserved. 45100169
some products, specifications, and services mentioned in this manual are described
in pending patent applications or are protected by patents.
T
H
E
R
M
O
M
A
S
S
E
U
R
®
8
supersedes page 22 of owner’s Manual
2. installation (cont’d)
once plumbing is fully installed and before beginning
any other work, fill the thermomasseur
®
to overflow
and wait 30 minutes. Check all plumbing hook-ups
and bath for leaks.
Bainultra
®
is not responsible for
any water damage caused by improper installation
(see warranty section)
.
install turbine and inmix power module connections
according to specifications outlined in the
MiaMulti
®
electrical installation - turBine
section.
leaK test
eleCtriCity
balneo
®
- naos & sanos
installation
notes
• since these models sit directly on the floor, the overflow drain pipe opening is factory-drilled.
• to installation of the naos or sanos on a concrete slab with no access below for air entry to the
bath: a hole of 1 5/8 inch (4.1 cm) in diameter must be drilled into the bath skirt to allow air
supply to the bath. important: do not drill above height of existing hole in the skirt intended to
connect drain to overflow.
Balneo
®
- naos & sanos - installation
2-5
for geysair-equipped baths,
connect
the geysair electrical wire supplied (orange
label) to the turbine wire (also marked with
an orange label) in the junction box.
test
for grounding continuity between the
bath grounding terminal
and the
bath power supply.
failure to perform
the grounding continuity test could
result in serious personal injury.
2-6
for geysair-equipped baths,
the geysair
unit must be connected to the hot water
supply with a 3/8 male compression or
1/2“ male nPt hose bibb.
a t and a valve
(not supplied)
must be installed at the
hot water intake.
Содержание GEYSAIR
Страница 2: ......