Bailey infi 90 NIMP01, Инструкция

Страница: 16 / 52

INTRODUCTION
SPECIFICATIONS
1 - 6 I-E96-401A
®
SPECIFICATIONS
Refer to Table 1-4 for the specifications of the NIMP01 and
NIMP02 termination modules.
Table 1-4. IMP Termination Module Specifications
Property Characteristic/Value
Power Requirements +24 VDC, 210 mA maximum current consumption
Communication Two RS-232-C serial ports, or one RS-232-C port and one RS-485 port.
1 control station serial link
Cable Insulation Specifications:
PVC (UL Rating CL2) 80°C (176°F) at 300 V
Non-PVC (UL Rating PLTC) 90°C (194°F) at 300 V
Mounting Screw mounts on the field termination panel.
Environmental:
Electromagnetic/Radio
Frequency Interference Values are not available at this time. Keep cabinet doors closed. Do not
use communication equipment any closer than 2 meters from the cabi-
net.
Operating Temperature 0° - 70°C (32° - 158°F)
Relative Humidity 5% - 90% (
±
5%) up to 70°C (158°F) (noncondensing)
Altitude Sea level to 3 km (1.86 mi)
Air Quality Bailey equipment should be operated and stored in a noncorrosive envi-
ronment.
Cooling Requirements No cooling necessary when used in Bailey cabinets and operated within
environmental limits.
Certification All termination units are CSA certified as process control equipment for
use in an ordinary (nonhazardous) location.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE