Baileigh SH-8008HD, Руководство оператора

Страница: 25 / 60

22
22
CUTTING MODE SELECTOR SWITCH
– This is a 3-
position selector switch which allows you to pick one
of three shearing modes. Pressing the foot pedal in
the
SIN (singular) mode will complete one full shear
cycle. In INCH mode the top blade can be stepped
down gradually. When it reaches the bottom of the
stroke it will automatically raise up. In
AUTO mode
the upper blade will cycle continuously.
LAMP ON-OFF SWITCH
– This selector switch turns
the green fluorescent lamp on or off. The main
disconnect must be on.
RAKE ANGLE POSITION INDICATOR LIGHTS
– As
the rake angle changes, these lights indicate what
gauge material the rake angle is set for.
RAKE ANGLE DECREASE AND INCREASE PUSH
BUTTONS
– The red pushbutton when depressed
multiple times decreases the rake angle. Pushing the
green button multiple times increases the rake angle.
RAKE ANGLE ADJUSTMENT ON - OFF SWITCH
–
T
his selector switch must be “
ON
”
in order for the
rake increase / decrease pushbuttons to work.
SIN
INCH
AUTO
OFF
LAMP
ON
OFF ON
MILD STEEL T.S 64000psi
14GA 1/4"
18GA
STAINLESS T.S 100000psi
10 GA
3/16"
3/16"