21
21
WORKPIECE COUNTER
– The counter registers each completed
cycle that the upper blade makes. The slide switch at the upper right
of the counter, when in the locked position, keeps the counter from
accidentally being reset. To reset the counter, press the button in
the upper left corner.
POWER INDICATOR LIGHT
– When the disconnect switch is
turned on the white light will be lit. Make sure machine is plugged
into correct power source and that both E-Stop buttons have been
reset.
CUT LENGTH ADJUSTABLE TIMER
– The cut length timer
determines how soon the top blade starts returning to the up
position. For a narrow piece of material set the number on the timer
low. (0 to.5) For a wider piece increase the number on the timer.
Note
: As the rake angle is increased, it will become
necessary to increase the number on the timer as well.
PUMP START PUSHBUTTON
– When depressed the green light
on the
“PUMP START”
button will be lit and the pump motor will
start. Press the footswitch pedal and the top blade should go down
and return to the up position.
E-STOP BUTTON
– When pressed, the red E-STOP button will be
lit and all machine functions will stop. Turn button clockwise (
cw
) to
reset.
0
0.5
1.0
1.5
2.0
2.5
3.0
X1
X10
S
M
UP
PW
TIMER
STPY-M3
Содержание SH-8008HD
