background image

 

 

THANK YOU & WARRANTY 

Thank you for your purchase of a machine from Baileigh Industrial. We hope that you find it 
productive and useful to you for a long time to come. 

 

Inspection & Acceptance.

  Buyer shall inspect all Goods within ten (10) days after receipt thereof. Buyer’s 

payment shall constitute final acceptance of the Goods and shall act as a waiver of the Buyer’s rights to inspect or 
reject the goods unless otherwise agreed. If Buyer rejects any merchandise, Buyer must first obtain a Returned 
Goods Authorization (“RGA”) number before returning any goods to Seller. Goods returned without a RGA will be 
refused. Seller will not be responsible for any freight costs, damages to goods, or any other costs or liabilities 
pertaining to goods returned without a RGA. Seller shall have the right to substitute a conforming tender. Buyer will 
be responsible for all freight costs to and from Buyer and repackaging costs, if any, if Buyer refuses to accept 
shipment. If Goods are returned in unsalable condition, Buyer shall be responsible for full value of the Goods. 
Buyer may not return any special-order Goods. Any Goods returned hereunder shall be subject to a restocking fee 
equal to 30% of the invoice price. 
 

Specifications.

 Seller may, at its option, make changes in the designs, specifications or components of the Goods 

to improve the safety of such Goods, or if in Seller’s judgment, such changes will be beneficial to their operation or 
use. Buyer may not make any changes in the specifications for the Goods unless Seller approves of such changes 
in writing, in which event Seller may impose additional charges to implement such changes. 
 

Limited Warranty.

  Seller warrants to the original end-user that the Goods manufactured or provided by Seller 

under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from 
the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any 
instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The 
original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of 
the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to 
Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without 
a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods 
to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective 
Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for 
replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole 
obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty 
does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or 
replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, 
abuse, neglect, or accidents, (f) defects or damage to the Goods resulting from improper or unauthorized 
alterations, modifications, or changes; and (f) any Goods that has not been installed and/or maintained in 
accordance with the instruction manual or technical guidelines provided by Seller. 
 

EXCLUSION OF OTHER WARRANTIES.

 THE FOREGOING LIMITED WARRANTY IS IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED. ANY AND ALL OTHER EXPRESS, STATUTORY OR IMPLIED 
WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. NO WARRANTY IS MADE WHICH 
EXTENDS BEYOND THAT WHICH IS EXPRESSLY CONTAINED HEREIN. 
 

Limitation of Liability.

  IN NO EVENT SHALL SELLER BE LIABLE TO BUYER OR ANY OTHER PARTY FOR 

ANY INCIDENTIAL, CONSEQUENTIAL OR SPECIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOST 
PROFITS OR DOWN TIME) ARISING FROM OR IN MANNER CONNECTED WITH THE GOODS, ANY BREACH 
BY SELLER OR ITS AGENTS OF THIS AGREEMENT, OR ANY OTHER CAUSE WHATSOEVER, WHETHER 
BASED ON CONTRACT, TORT OR ANY OTHER THEORY OF LIABILITY. BUYER’S REMEDY WITH RESPECT 
TO ANY CLAIM ARISING UNDER THIS AGREEMENT IS STRICTLY LIMITED TO NO MORE THAN THE 
AMOUNT PAID BY THE BUYER FOR THE GOODS. 
 
 
 

Содержание DP-1400VS

















































Отзывы: