Baileigh Industrial DP-1400VS, Руководство оператора

Страница: 20 / 48

17
17
Drill Head
The drill head attaches to the top of the column. It
houses the motor, spindle, controls, and transfer
mechanisms. Attached to it is the electrical enclosure,
the protective guard, the work light, and the coolant
valve with nozzle.
Work Table
The sturdy work table can be positioned at varying
heights and rotated 180° in either direction. It has T-
slots to allow the use of 1/2” or M14 bolts. At the back-
right side of the work table is the crankshafts. The
crankshaft (A) controls the up /down motion of the
table. Always unlock the table with clamping nut (not
visible in this picture.) at the back of the column,
before changing the height or rotating it. Then lock the
work table to secure in position.
Machine Base
The sturdy machine base supports the entire machine
as well as provides a secondary work table. It has T-
slots to allow the use of 1/2” or M14 bolts.
Coolant Pump and Tank
The coolant pump and tank are located in the base.
An access cover on the side of the base allows
access to the coolant tank for cleaning.
The flow valve is mounted to the side of the drill head
with a flexible nozzle which may be positioned as
needed.
A