Baileigh Industrial DP-1400VS, Руководство оператора

Страница: 36 / 48

33
33
Accessing and Cleaning the Coolant System
1. Clean the drain screen.
2. Drain and wash out the dirt and debris from the reservoir.
3. Replace coolant drain plug.
4. Thoroughly clean the pump and pump inlet
5. Re-fill tank with coolant solution.
Oils for Lubricating Coolant
Any 10:1 (water to coolant) solution will work, however we recommend Baileigh B-Cool 20:1
(water to coolant) biodegradable metal cutting fluid. It has excellent cooling and heat transfer
characteristics, is non-flammable, and extends tool and machine life. Each gallon of concentrate
makes 21 gallons of coolant.
Coolant and Oil Disposal
Used oil products must be disposed of in a proper manner following your local regulations.
Storing Machine for Extended Period of Time
If the Drill Press is to be inactive for a long period of time, prepare the machine as follows:
•
Detach the plug from the electrical supply panel.
•
Empty and clean the coolant reservoir.
•
Clean and grease the machine.
•
Cover the machine.
Feed Shaft Spring Tension
The feed shaft return spring is adjusted at the
factory; however, during the life of the drill press
you may want to adjust the feed shaft return
spring so the feed shaft return pressure suits
your operating needs.
To adjust the feed shaft spring tension:
1. Disconnect the drill press from the power
supply.
2. Remove the cover panel to access the spring
assembly.