Baileigh Industrial DP-1400VS, Руководство оператора

Страница: 31 / 48

28
28
•
Rotate the table and arm as an assembly
around the column or use the hand crank to
raise or lower the table and arm assembly.
•
Always lock the column clamp before machining
any material.
•
To flip the table on the center post, unlock the
lock handle (and if needed, the adjusting bolt)
and rotate the table as desired. Tighten the lock
handle to secure the table in place.
•
Be sure to tighten the adjusting bolt as needed to insure that the table does not move during
operation.
•
As needed, loosen the hand knob on the side of the
vise and slide the entire vise in or out as needed to
position the work piece under the drill bit.
Loosen
Lock
Loose