Baileigh Industrial DP-1400VS, Руководство оператора

Страница: 18 / 48

15
15
A Motor Cover Contains the motor and drive components
B Belt Tension Handle Cammed lever used to loosen and tighten the belt tension.
C Electrical Enclosure Houses the electrical components
D Tapping/Feed Switch
When in tapping mode, this switch engages the spindle
rotation and feed function when the quill feed handle is
pulled slightly forward.
E Coolant Nozzle W/Valve
Coolant nozzle and flow control valve. May be placed as
needed to direct coolant flow to the work area.
F Down - Feed Handle Controls up-down movement of the spindle
G
Table Elevation Crank
Handle Loosen the column clamping nut and then crank the handle
to adjust the table height.
H Table Rotation Lock
Lock bolt used to hold the table in position on its rotational
axis.
I Coolant Pump Pumps coolant to the chuck.
J Base Supports the drill press.
K Vice 4” (101mm) Built in vise used to clamp and hold work material.
L Vice Crank Handle Opens and closes the vise jaws.
M Work Table Adjustable table with T-slots
N
Table Elevation Clamp
Handle Locks the table to the column to hold the height and
position setting.
O Safety Guard Adjustable guard with limit switch shut-off
P Chuck Holds various tooling for drilling and tapping.
Q Depth Stop Knob Moves the depth stop up and down
R Limit Switch Stops the machine if the guard is in an open position
S Depth Indicator Used for setting the drill or tap depth