Baileigh Industrial BS-210M, Руководство оператора

Страница: 38 / 60

35
35
Gearbox Maintenance
The gearbox requires periodic changing of the oil. The first change should be between 2 and 6
months depending upon the amount of use. Thereafter the gearbox oil should be changed
yearly.
1. Disconnect Power From the Saw
2. Raise the saw bow to a vertical position.
Note: You may have to back
off the upper travel adjusting bolt.
3. Remove the oil drain plug (AO) and
drain the oil into a catch basin.
Loosening oil fill plug (AP) will help oil to
drain.
4. After draining, replace drain plug (AO).
5. Return the saw bow to a horizontal
position.
6. Remove the fill plug (AP) and add .32
quart of gear oil. (For reference use
SHELL type gear oil or Mobil gear oil #90).
Storing Machine for Extended Period of Time
If the Band Saw is to be inactive for a long period of time, prepare the machine as follows:
1. Detach the plug from the electrical supply panel.
2. Clean and grease the machine.
3. Release tension on the blade or remove blade.
4. Cover the machine
5. Drain coolant
AO
AP