Baileigh Industrial BS-210M, Руководство оператора

Страница: 33 / 60

30
30
MACHINE ADJUSTMENTS
Blade Replacement
When replacing the saw blade: Wear gloves when handling the saw blade.
1. Raise the saw bow and fully close the ball valve.
2. Remove the front blade guard (T) and the (4) knobs (U) holding on the main blade guard.
(Carefully pull out the tongue from the safety interlock switch (V).
3. Loosen the saw blade with the tension hand wheel (D) and remove it from the flywheels and
the blade guide blocks.
4. Assemble the new blade by placing it first between the
guide blocks and then on the face of the flywheels. (note
blade direction)
5. Tension the blade, making sure it seats properly on the
flywheels.
6. Reassemble the front blade guide (T) and the main blade guard (W), making sure the switch
tongue engages the switch or the saw will not start.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Always follow proper safety precautions when working on or around any machinery.
D
U
W
V
U
T
BLADE DIRECTION OF TRAVEL