Baileigh Industrial BS-210M, Руководство оператора

Страница: 37 / 60

34
34
Six month maintenance
•
Do a continuity check of the safety circuit
Note: Proper maintenance can increase the life expectancy of your machine.
Oils for Lubricating Coolant
Any 10:1 (water to coolant) solution will work, however we recommend Baileigh B-Cool 20:1
(water to coolant) biodegradable metal cutting fluid. It has excellent cooling and heat transfer
characteristics, is non-flammable, and extends blade and machine life. Each gallon of
concentrate makes 21 gallons of coolant.
Oil Disposal
Used oil products must be disposed of in a proper manner following your local regulations.
Coolant System Maintenance
1. Disconnect Power From the Saw
2. To clean the tank, first remove the pipe plug (AK) to
drain the coolant.
3. Take off the screen (AL) by removing (4) screws.
4. Remove the pump (AM) by taking out (2) socket cap
screws.
5. After tank is completely drained use a vacuum cleaner
to remove all chips and debris.
6. Replace the plug.
7. Thoroughly clean the pump (AM) and replace.
8.
Fill the tank with coolant to approximately 1” below the
screen.
9. Replace the screen (AL). Removable drip tray (AN)
shown in place
AM
AK
AL
AN