Baileigh Industrial BS-210M, Руководство оператора

Страница: 32 / 60

29
29
Clamping
These examples below show ways to clamp a variety of cross sections. Always keep in mind the
cutting capacity of the saw to achieve efficient saw cuts and long blade life. Do not use blades of
a size different from that shown in the technical specification chart.
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
•
Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.