LM_MDS2000_BA_02_0810
Cabling
Page 15/44
On each PSU, the connector shows:
L (Live) – (Earth) – N (Neutral): 220 VAC input
(Earth) – 0V (-) – 18 VDC (+): 24 VDC output
On each I/O unit, a connector shows you: L (+) – E (Earth) – N (-): 24 VDC
input.
The earth must be connected with the frame nut and the shield. The input
connector is valid for the alimentation of the electronic board and the
solenoids.
On each keypad, a connector shows you: 18V Neut (-) – 18V Live (+): 24
VDC input.
The earth must be connected with a frame nut and the shield (between Can
H and Can L).
On each display, a connector shows you: 18V Neut (-) – 18V Live (+): 24
VDC input.
The earth must be connected with a frame nut and the shield (between Can
H and Can L).
A 2 Volts deviation range is allowable.
The power cable is: type 2 core + earth 0,75 mm² minimum.
