LM_MDS2000_BA_02_0810
PC card upgrade
Page 28/44
2.2.4 PC minimum requirements
IBM compatible PC 386 – 25 Mhz
2 MB RAM memory
40 MB hard disk drive
3,5" Floppy disk drive
VGA monitor
Operating system: Microsoft Windows Version 3.11
Serial mouse
1 empty 8-bit slot
2.2.5 MDS 2000 requirements
Check that your MDS 2000 system has at least the following system
configuration before installing the PC card upgrade:
Eprom Version #6.02 on I/O
Eprom Version #3.05 on keypad
2.2.6 PC card hardware installation
1. Turn off power to PC
2. Remove cover from PC
3. Set-up card address – see table below
Conversion table
Switch 1 = 10
Switch 4 = 80
Switch 2 = 20
Switch 5 = 100
Switch 3 = 40
Switch 6 = 200
ON
1
2
3
4
5
6
The default address is 320
