LM_MDS2000_BA_02_0810
Using the software
Page 31/44
2.3. Using the software
On the right side of the bottom of the screen, there are 8 little squares. These
squares represent the availability of the maximum of 8 I/Os connected. When an I/O
is connected the square is green. This feature allows you to check the network
between the PC and all the I/Os.
In case that none of the squares are green, it means wrong communication on the
network, please check the wiring with the MDS 2000 in the network.
On the bottom of the screen, you have different options:
2.3.1 Configuration
button
Click on it and enter your PIN number (different PIN numbers for three
levels of security: supervisor 9999 – system 1111 – configuration
2222).
You must configure all the MDS 2000 installation from the
PC. The PC software doesn't recognise the previous
configuration made at the keypad.
General:
From there, you can configure the different codes, times and general
configuration of the installation.
Click on the "change" buttons to get enable the windows button and
when all the changes are done, click the "save" button to save the
configuration.
