Badger Meter Dynasonics DXN Скачать руководство пользователя страница 97

Страница: 97 / 112

Digital Certificates

The software uses digital certificates . These digital certificates confirm the identity of Internet users sending X .509 standard

encrypted information . The software retrieves certificates and updates certificate revocation lists . These security features

operate only when you use the Internet .

Auto Root Update

The Auto Root Update feature updates the list of trusted certificate authorities . You can switch off the Auto Root

Update feature .

Windows Media Player

When you use Windows Media Player, it checks with Microsoft for
•  Compatible online music services in your region;
•  New versions of the player; and
•  Codecs if your device does not have the correct ones for playing content . You can switch off this feature . For more

information, go to:

http://microsoft.com/windows/windowsmedia/mp10/priV ACy.aspx.

Windows Media Digital Rights Management

Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property,

including copyrights . This software and third party software use WMDRM to play and copy WMDRM-protected content . If the

software fails to protect the content, content owners may ask Microsoft to revoke the software’s ability to use WMDRM to play

or copy protected content . Revocation does not affect other content . When you download licenses for protected content, you

agree that Microsoft may include a revocation list with the licenses . Content owners may require you to upgrade WMDRM to

access their content . Microsoft software that includes WMDRM will ask for your consent prior to the upgrade . If you decline

an upgrade, you will not be able to access content that requires the upgrade . You may switch off WMDRM features that access

the Internet . When these features are off, you can still play content for which you have a valid license .

Misuse of Internet-based Services

You may not use these services in any way that could harm them or impair anyone else’s use of them . You may not use the

services to try to gain unauthorized access to any service, data, account or network by any means .

Windows Update Tgent (also known as Software Update Services)

The software on the device includes Windows Update Agent (WUA) functionality that may enable your device to connect

to and access updates (Windows Updates) from a server installed with the required server component . Without limiting any

other disclaimer in this Microsoft Software License Terms or any EULA accompanying a Windows Update, you acknowledge

and agree that no warranty is provided by MS, Microsoft Corporation or their affiliates with respect to any Windows Update

that you install or attempt to install on your device .

Product Support

Contact Badger Meter for support options . See the support number provided with the device .

Backup Copy

You may make one backup copy of the software . You may use it only to reinstall the software on the device .

Proof of License

If you acquired the software on the device, or on a disc or other media, a genuine Certificate of Authenticity label with a

genuine copy of the software identifies licensed software . To be valid, this label must be affixed to the device, or included on

or in the Badger Meter software packaging . If you receive the label separately, it is not valid . You should keep the label on the

device or packaging to prove that you are licensed to use the software . To identify genuine Microsoft software, see

http://www.howtotell.com

Transfer to a Third Party

You may transfer the software only with the device, the Certificate of Authenticity label, and these license terms directly to a

third party . Before the transfer, that party must agree that these license terms apply to the transfer and use of the software .

You may not retain any copies of the software including the backup copy .

Microsoft Software License Terms for Windows XP Embedded and Windows Embedded Standard Runtime

Page 97

November 2016

HYB-UM-00090-EN-04

Содержание Dynasonics DXN

















































































































Результаты поиска

Содержание Dynasonics DXN

Отзывы:

Бренды по названию

Популярные бренды

Badger Meter Dynasonics DXN, Руководство пользователя

Результаты поиска

Содержание Dynasonics DXN

Отзывы:

Бренды по названию

Популярные бренды