To enter a new security code use the RIGHT arrow key
to move the cursor under the digit to be changed and use
the UP or DOWN arrow keys to change the digit to the
desired value. The values can be from 0 to 9 and A to F.
After entering the security code, press the ENTER key
and the following screen will appear:
-STORING PARAMETERS-
PARAMETERS>PROGRAMMED
This screen indicates that the new parameters have been
stored in the recorder. The display will then return to the
normal operating screen. This completes the Calibration
Section.
OPTION (FOR FLOW UNITS SCREEN)
Selecting OPTION in the Flow Units screen allows the
entering of any three letter label for special engineering
units. Press the ENTER key with OPTION selected and
the following screen will appear:
MEASUREMENT UNITS
OPTION INITIALS=AAA
There will be a cursor under the first letter. Use the UP
or DOWN arrow keys to select the desired letter. Press
the RIGHT arrow key to move the cursor to the second
and third letter and select the desired letter. Press the
ENTER key to enter the OPTION INITIALS. The
following screen will appear:
DISPLAY FLOW LABEL AND
TOTALIZER ? YES
This screen asks if the FLOW label is to be displayed
on the normal operating screen. If the recorder is to be
used to record temperature or some other measurement
not related to flow or requires totalization, then selecting
NO will remove the FLOW label and the totalizer value
from the screen. Use the UP or DOWN arrow keys to
select YES or NO and press the ENTER key. The
following screen will appear:
UNIT MULTIPLIER
AAA X 1,000
This screen allows the selection of the desired flow rate
multiplier. Press the UP or DOWN arrow keys to select
the desired multiplier and then press the ENTER key. The
ollowing screen will appear:
f
FULLSCALE UNITS=AAA
FULLSCALE = 0000 X 1,000
This screen allows the entering of the full scale flow
rate desired. Press the UP or DOWN arrow keys to select
the desired value and the RIGHT arrow key to move the
cursor under the digit to be changed. After the desired
value is selected, press the ENTER key and the following
screen will appear:
OFFSET UNITS=AAA
OFFSET=0000 X 1,000
This screen allows an offset value to be used instead of
0 for a 4 mA input. If the input device has a value other
than 0 for 4 mA, then that value would be entered into
this screen. Press the UP or DOWN arrow keys to select
the desired value and the RIGHT arrow key to move the
cursor under the digit to be changed. After the desired
value is selected press the ENTER key.
TOTALIZER UNIT
UNIT INITIALS=AAA
This screen allows the entering of the desired totalizer
unit label. Press the UP or DOWN arrow keys to select
the desired letter and the RIGHT arrow key to move the
cursor under the letter to be changed. After the desired
letters are selected press the ENTER key. The following
screen will appear:
TOTALIZER MULTIPLIER
X 1,000
This screen allows the selection of the desired totalizer
multiplier. Press the UP or DOWN arrow keys to select
the desired multiplier and then depress the ENTER key.
The following screen will appear:
14
