Bacsa BLP-545, Руководство пользователя

Страница: 56 / 71

USER´S MANUAL
50
8. APPENDIX
8.1 SUMMARY OF ACCESS TO PROGRAMMING
To access the different programming options press the sequence
∗∗∗∗
F 0 7 9 0 and then the
corresponding key in accordance with the table:
Key PROGRAMMING
0
EURO Stage (5.3), Stability (5.7),
Headers Lists (5.8), Inventories (2.14)
1
Programming Items (3.2)
2 Programming Header Lines (6.8)
3 Programming Clock (sec. 6.9)
4 General set-up (sec 6.2)
5 Addressing LP2550 (sec 7.1)
6 Assigning Direct keys (sec 3.6)
7 VAT rates (sec 3.3)
8
Change of currency (6.5)
9 Printing Currencies (6.4)
TOT3 Programming Sales assistants (3.5)
T Defining Tare keys (3.4 )
TOT2 Sections (6.6)
PLU Label formats (5.2 )
O1
Orders (7.4)
TOT1 Weight display (8.5)
+ Printer (4)
- Teleload items, formats, ingred., set-up
∗∗∗∗
QUIT
8.2 CHANGING PAPER IN PRINTER
To change the paper in the printer, take the following steps:
1. Open up the labelling machine’s side cover, on the right side.
2. Open up the printer and free the paper from the heat-sensitive head by pressing the closing
mechanism. Remove the old roll.
3. Place the new roll as shown in the photograph. Ensure that the heat-sensitive side of the paper is
the one in contact with the head. (If such is not the case, nothing will be printed).
4. Replace the lid on the printer and close the side cover.
To work in receipt mode, set-up parameter 4 must be at 0.
To replace the self-adhesive paper:
-
Open up the cover on the right side as already
mentioned.
-
Open up the printer and free the paper from the heat-
sensitive head by pressing the closing mechanism.
Remove the old roll.
-
Place the new roll as shown in the photograph. Ensure
that the heat-sensitive side of the paper is the one in
contact with the head. (If such is not the case, nothing
will be printed).