![background image](http://html1.mh-extra.com/html/backyard-discovery/oxford-6111/oxford-6111_owners-manual_3386775078.webp)
Phase Notes
• Assemble with hardware as shown.
Slide Attachment
Phase 29
Hardware needed:
• (2) B - NUT BARREL WH 5/16x5/8 - H100004
• (2) AD - WASHER LOCK EXT 12x19 - H100031
• (3) AC - WASHER LOCK EXT 8x19 - H100030
• (2) CM - BOLT WH 5/16x1/2 - H100115
• (1) Z - LAG SCREW WH 5/16x2 - H100027
Parts needed:
• (1) SLIDE ASSEMBLY
Step 3: Attach the Slide Assembly to
the fort floor using the Safe-T-Fuse
hardware, as shown.
Step 1: Center the wave slide
assembly in the opening opposite the
swing beam assembly, as shown.
Step 2: Using a drill with a 5/16" bit,
drill a hole through the holes on the
slide and through the fort floor.
SLIDE ASSEMBLY
SLIDE ASSEMBLY
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
CM
Z
CM
AC
B
AD
AD