Bacharach PCA 2 24-9448, Инструкция по эксплуатации и обслуживанию

Страница: 72 / 108

Instruction 24-9448 5-6
Calibration
5.5 T-Air Calibration
Ths procedure frst zeros and then spans the ambent-temperature chan-
nel to known temperature values.
The use of an electronc thermocouple smulator s the preferred method of
producng the desred calbraton temperatures. Alternatvely, contaners
of ce water and bolng water can be used.
Material Required:
Thermocouple Smulator (K-type)
Range: 0 to 600 °F
Accuracy: ±0.5 °F
(Alternatvely) Ice-Water, Bolng Water, Thermometer
TA-Zero Procedure:
1. Set thermocouple smulator to room temperature and plug ts output
nto the T-AIR connector located at the bottom of the analyzer.
Alternatively:
Plug the probe’s thermocouple nto the T-AIR connector
located at the bottom of the analyzer. DO NOT attach the probe’s
gas hose to the analyzer’s GAS port; otherwise water will be
drawn into the analyzer!
2. If not already done, turn ON the analyzer
and dsplay the CALIBRATION LIST screen
per Secton
5.2
.
3. Use the buttons to hghlght T-Ar, and
then press
ENT
to dsplay the CALIBRATE
TA-ZERO screen.
“Measured” is the current temperature read-
ing, while “Applied” is a known temperature
that will be applied for calibration purposes.
4. Set thermocouple smulator to 32 °F (0 °C),
and then use the and buttons to enter
an Appled value that exactly equals the set-
tng of the smulator.
Alternatively:
Submerge probe tp nto an ce-
water bath wth a thermometer, wat several
mnutes, and then use the and but-
tons to enter an Appled value that exactly
equals the thermometer readng.
•
-
-
•
CALIBRATION LIST
Pressure
T-Stack
T-Air
CO-LO
SO
2
NO
NO
2
(more)
MENU
F1 F2 F3
CALIBRATE TA-ZERO
Measured 33 °F
Applied 032 °F
06/27/06 11:55:30 PM
PRINT
F1 F2 F3