Manual Part Number:
5-06-4900-65-0
Revision Level: A
ECO 8541
File Name: MN-A-0177
Page 34
The RS-232 port may be used to send data to a host computer. There are four available
formats that the Model 5124BE-N1-WO may send data to the host computer. The speed of
the data transmission can vary from 300BPS to 38.4KBPS. Unless otherwise specified, the
following is the default transmission format:
PROPERTIES
MODEL 5124BE-N1-WO
ANALYZER SETTING
BITS PER SECOND
9600
DATA BITS
8
PARITY
None
STOP BITS
1
FLOW CONTROL
None
DATA FORMAT
HUMAN READABLE
The following are the available formats:
•
No Output:
The Model 5124BE-N1-WO analyzer does not send any data on the RS-
232 port.
•
Human Readable:
The output data format is suitable for a data terminal that a person
can read. The data stream includes the following: Mode
•
O
2
Concentration
•
Alarm-1
status
•
Alarm-1 status
•
list of Fault codes active.
•
Machine Code with No Checksum:
The data stream is formatted to be easily
readable by another computer. No checksum is provided to ensure the data integrity.
The data stream includes the following information: Start Transmit
•
O
2
Concentration
•
Fault codes active
•
List of Fault Codes
•
Alarm-1 status
•
Alarm-1 status
•
End
Transmit. For detailed information on data formats, please contact the Neutronics
Service Department.
•
Machine Code with Checksum:
The data stream is formatted to be easily readable
by another computer. A 256-bit checksum is provided to ensure the data integrity. The
data stream includes the following information: The order of data in each packet is as
follows:
Start Transmit
•
O
2
Concentration
•
Fault codes active
•
List of Fault Codes
•
Alarm-1 status
•
Alarm-2 status
•
Checksum
•
End Transmit. For detailed information on data formats, please contact the Neutronics
Service Department.
•
Tab Delineated:
The format is similar to the Human Readable, but all the data is tab
delineated to allow for easy transfer of data to a spreadsheet program.
