Manual Part Number:
5-06-4900-65-0
Revision Level: A
ECO 8541
File Name: MN-A-0177
Page 14
Mains Power
Use 18-22 AWG, shielded cable for the connections. The shielded cable must be grounded
at both ends to comply with EN61326-1:2006 specifications. The ground shielding at the
analyzer end is to be connected to terminal block TB1 pin 1. Loop individual connectors
around the ferrite clamp provided.
Mains Power Voltage:
18
– 30 Volts DC
Connections:
DC +:
Terminal Block TB1 Pin 4
DC -:
Terminal Block TB1 Pin 2
Earth/Shield Ground:
Terminal Block TB1 Pin 1
WARNING:
Do not apply mains power to the analyzer or the analyzer until all the
electrical and pneumatic connections to the analyzer and the remote sensor have been
properly installed.
