47
48
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
7.6.2
Installation - Lap Belt only
REAR ENTRY
Belt Routing
• Use this installation method when using WITH a
Top Tether and with children 22 - 40 lbs. (10 to 18 kg).
• Use this installation method when using WITHOUT a
Top Tether and with children 22 - 50 lbs. (10 to 23kg).
To secure car seat in vehicle:
1. Assemble of the Back Support (see
“Assembly and Removal of Back
Support” section).
2. If not using a Top Tether to install the car seat,
store LATCH and Top Tether by securing
LATCH Connectors and Tether Hook on
LATCH/Tether Storage Bar at bottom of Back
Support as shown.
• Vehicle seat belt system MUST stay tightly adjusted to car
seat at all times. If vehicle seat belt does not stay tight, read
vehicle owner’s manual and “Vehicle Seat Belts’ section in
this manual.
• When using a lap only belt WITH a Top Tether, Belt Routing
must be changed to Front Entry Belt Routing WITH Top Tether
when child’s WEIGHT is 40 lbs. (18kg) or more.
LATCH Connectors
Top Tether Tether/LATCH
Storage
13. Check for a secure installation by
grasping the car seat armrest and
pushing side-to-side and front-to-back.
The car seat should not move more than
1 inch in either direction.
• If the car seat moves more than 1
inch, retighten the vehicle seat belt
and Top Tether and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch
try another seating position or see
the “Vehicle Seat Belts” section and
check your vehicle owner’s manual for
information on securing car seats.
To remove car seat:
1. Loosen Top Tether by pressing the button
on Tether Adjuster and sliding belt through
adjuster
(1)
.
2. Unhook Top Tether Hook for vehicle tether
anchor. Press up on retainer
(2)
, unhook
Tether Hook
(3)
, and remove
(4)
.
3. Unbuckle vehicle seat belt and remove
seat belt from belt path.
2
3
4
1
Tether
Adjuster
WARNING!
