79
80
10.0
Operation and Adjustments
10.0
Operation and Adjustments
To re-attach Harness Straps in the new height positions:
Re-attach the Harness Straps at the required height by placing the
Harness Straps into the matching harness straps slots in the Back
Support Pad and Back Support,
a. Thread the Harness Strap through
the Harness Slots in the Seat Pad
and Back Support at the height at or
just above the child’s shoulders.
Note: Make sure that the Harness
Straps are through the Harness
Strap Slots at the same height in
the Back Support pad and the Back
Support.
b. From back of car seat, pull Harness
Straps through the Harness Strap
Slots in back support until you have
enough strap to reach the Belt
Adjuster Plate
SI
NG
LE
U
SE
A
PP
RO
VE
D
BT
20
16
SIN
GLE
US
E A
PPR
OV
ED
B
T 2
016
SINGLE
USE A
PPROV
ED
B
T 2016
SIN
G
LE
U
SE
A
PP
RO
VE
D
B
T 2
01
6
SIN
G
LE
U
SE
A
PP
RO
VE
D
B
T 2
01
6
C- Hybrid 3-1 manufactured before 12/15/2016 Follow C.1.
Hybrid 3-1 manufactured on or after 12/15/2016 Follow C.2.
c.1 Feed one Harness Strap Connector plate through each Harness
Strap End
(1)
. Rotate other Harness Strap Connector plate and
feed through each Harness Strap End
(2)
. Ensure that the straps
are securely connected to both connector plates
(3)
.
c.2 Feed one Harness Strap Connector plate through
each Harness Strap End
(1)
. Ensure both Straps
are securely connected to the connector plate
(2)
.
d. Inspect the Harness Straps from the front and back of the car
seat to ensure that they are not twisted. Twisted harness straps
can prevent proper tightening of the harness and thus may not
adequately restrain your child in a sharp turn, sudden stop or crash.
Before Using the car sat, please pull on the harness straps from the
front of the car seat to ensure they are securely re-attached.
1
2
3
