background image

96

95

13.0

 Warranty and Replacement Parts

Warranty

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE 

CONTACT BABY TREND FOR REPLACEMENT PARTS, SER-

VICE AND REPAIR.

The Baby Trend

®

 warranty covers workmanship defects within the 

first 180 days of purchase. Any product which has been subjected 

to misuse, abuse, abnormal use, excessive wear and tear, im-

proper assembly, negligence, environmental exposure, alteration 

or accident, or has had its serial number altered or removed invali-

dates all claims against the manufacturer. Any damage to property 

during installation is the sole responsibility of the end user.  The 

Customer Service Department can be contacted at 1 (800) 328-

7363 Monday through Friday between 8:00am and 4:30pm (PST). 

Return Authorizations are required prior to returning product(s) to 

Baby Trend

®

. Warranty only valid in North America. 

Replacement Parts

 

If you need help or replacement parts, please call our Customer   

 

Service Department at 1-800-328-7363 between the hours of 

 

8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through 

 

Friday or visit us online at www.babytrend.com.

How to Register Your Car Seat

  Please complete the following information. The model number and 

  manufactured in (date) can be found on a label on the bottom of the 

  child restraint. 

  Model Number : _________________
  Manufactured in (date) : _________________
  Purchase Date : _________________
 Please fill out the prepaid registration post card attached to the 

  safety harness and mail it today. 

   

  Child restraints could be recalled for safety reasons. You must 

  register this restraint to be reached in a recall. Send your name, 

  address, e-mail address if available, and the restraint’s model  

  number and manufacturing date to: Baby Trend, Inc,  

     13048 Valley Blvd. Fontana CA 92335 or call 1-800-328-7363 or   

  register online at: 

  https://babytrend.com/pages/car-seat-product-registration  

 

 

14.0

 Register Your Car Seat

Содержание FB58



















































Отзывы: